
Most fountain breakdowns start small: a blocked nozzle, a dirty filter, a loose cable. Regular checks catch them early. Print this checklist for your operator.
Every day
- Remove leaves and floating rubbish from the pool
- Check the water level; pumps must never run dry
- Watch one show: note any jet that is weak, uneven or missing
- Check that all lights are working
Every week
- Clean the pump suction screens and strainers
- Clean blocked nozzles (a weak or bent jet is the first sign)
- Check the control panel indicators and meters for anything unusual
- Top up or treat water as needed
Every month
- Clean the filters and check the water quality
- Inspect cables and joints in and around the water
- Check pump current on the panel meters; a change can show wear
- Clean light lenses so the colour stays bright
Every year
- Drain and clean the pool
- Service pumps and check seals and bearings
- Check earthing and electrical safety
- Test every channel of the console, drives and light controllers
- Update shows and add new songs
Safety first
Always switch off and isolate power at the panel before anyone touches pumps, lights or cables in the water.
Let us do it for you
Our annual maintenance contract (AMC) covers planned visits, cleaning, checks and priority repairs for pumps, lights, panels and consoles.
Frequently asked questions
Why is one jet weaker than the others?
Usually a blocked nozzle or suction screen. Clean it first; if the jet stays weak, the pump or its control may need checking.
Why does the water turn green?
Sunlight and nutrients make algae grow. Better filtration, regular cleaning and water treatment keep it clear.
Should the fountain run every day?
Running the pumps regularly is good for water circulation. Follow the run time your installer suggests for your pumps.
Need maintenance for your fountain?
Tell us about your fountain and its current condition.
